Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Inserting the label cartridge
Your printer comes with two RHINO label cartridges.
Visit www.dymo.com for information about purchasing additional
label cartridges.
To insert the label cartridge
Lift the label cartridge cover to open the
1.
label compartment. See Figure 4.
Make sure the label and ribbon are taut
2.
across the mouth of the cartridge and that
the label passes between the guideposts. If
necessary, turn the spool clockwise to
tighten the ribbon.
Insert the cartridge and press gently until
3.
the cartridge is eased into place.
Make sure the two blue clips lock the
4.
cartridge in place. Refer to the label
on the cartridge.
Close the label cartridge cover.
5.
To remove the label cartridge
Lift the label cartridge cover to open the label cartridge compartment.
1.
Press the Eject button. The label cartridge is automatically lifted.
2.
Replace the cartridge as described above.
3.
Lift
Figure 4
Eject
Button
3
Advertenties
Hoofdstukken
Inhoudsopgave
