Over deze taak
The following images indicate the location of the hard-drive and optical-drive cage and provides a visual representation of the installation
procedure.
Stappen
1. Connect the power and SATA cables to the optical drive while holding the cage upside down.
2. Hold the cage upright and align the mounting points with the ones on the chassis.
3. Push the cage until the assembly is secured onto the chassis.
4. Slide the lock towards the right to lock the cage in place.
5. Route the optical drive's power and data cables through the routing guide on the cage.
6. Route the hard-drive power and SATA cables through the routing guide on the lock.
Vervolgstappen
1. Install the
3.5-inch
hard-drive.
2. Install the
2.5-inch
hard-drive.
3. Install the
front
bezel.
4. Install the
side
cover.
5. Follow the procedure in
after working inside your
computer.
Onderdelen verwijderen en plaatsen
25