Koelplaat; Removing The Heat Sink - Dell OptiPlex 3080 Micro Servicehandleiding
Verberg thumbnails
Zie ook voor OptiPlex 3080 Micro:
- Onderhoudshandleiding (59 pagina's) ,
- Servicehandleiding (58 pagina's) ,
- Installatiehandleiding (37 pagina's)
Inhoudsopgave
Advertenties
3. Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the
system board.
4. Replace the (M2x3.5) screw to secure the WLAN card bracket to the WLAN card.
Next steps
1. Install the
hard-drive
assembly.
2. Install the
front
bezel.
3. Install the
side
cover.
4. Follow the procedure in
Koelplaat
Removing the heat sink
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
fan
assembly.
About this task
The following images indicate the location of the heat sink and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Demonteren en hermonteren
37
Advertenties
Inhoudsopgave
