Download Inhoudsopgave Inhoud Print deze pagina

Initial Use; Switching Off - Inventum HN136i Gebruiksaanwijzing

Elektrische deken
Verberg thumbnails Zie ook voor HN136i:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

5.2 Initial use

• Spread out the heated underblanket flat onto your mattress starting at the foot
end. The electric blanket can be used on both sides.
• To operate the heated underblanket connect the Control to the heated
underblanket by plugging in the connector.
• Then plug in the supply plug into the mains outlet.
• Then put on your bedsheet in the usual manner so that the heated underblanket is
between your mattress and the bedsheet.
CAUTION
Make sure that the underblanket is spread out entirely flat and that it will not
rumple up or crease when in use. Check its position when making the bed.
5.3 Switching on
To switch on the electric underblanket, set the slider for ON/OFF and temperature settings to setting 1, 2 or 3. The temperature setting
is illuminated when switched on.
5.4 Setting the temperature
Setting 0:
OFF
Setting 1:
minimum heat
Setting 2:
medium heat
Setting 3:
maximum heat
NOTE
• The foot area of this electric underblanket is heated to a greater temperature than the rest of the blanket.
• The quickest way to heat up the electric underblanket is to select the highest temperature setting of the control, first.
• We strongly recommend switching on the electric underblanket approx. 30 minutes before going to bed and
covering it with the quilt to prevent the warmth from escaping.
CAUTION
If the heated underblanket is used continuously (for several hours)
it is recommended to use the lowest setting (1) of the control to
avoid the body overheating and thereby any potential burns to the
skin or heat stroke.

5.5 Switching off

To switch off the electric underblanket, set the slider for ON/OFF and temperature settings to the OFF (0) position. The temperature
settings are then no longer illuminated.
NOTE
If the electric underblanket is not used for several days, set the slider for ON/OFF and temperature settings to the OFF
(0) position and remove the mains plug from the socket. Then remove the control from the electric underblanket by
disconnecting it at the connector.
18
English

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Hn236i

Inhoudsopgave