Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the
memory
module.
8. Remove the
DC-in
port.
9. Remove the
Coin cell
battery.
10. Remove the
Inner
frame.
Steps
1. Disconnect the system fan cable from the connector on the system board.
2. Remove the two (M2x5) screws that secure the system fan to the palmrest [1].
3. Lift the system fan away from the computer [2].
58
Onderdelen verwijderen en plaatsen
Advertenties
Inhoudsopgave
Probleemoplossen
