Download Inhoudsopgave Inhoud Print deze pagina

How To Set The Colour Of The Timebeam; Options - AEG FAVORIT 88705 VI1P Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

38
www.aeg.com
6.6 How to set the colour of
the TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
display is blank.
2. Press
• The indicators
and
• The indicator
flash.
• The display shows a number and
the letter C. Each number refers
to a different colour.
3. Press
the colour.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
and
,
,
,
start to flash and the
.
,
,
go off.
continues to
= TimeBeam
deactivated.
again and again to change
• You can see the different colours
on the kitchen floor.
4. Press the on/off button to confirm
the setting.
6.7 How to deactivate
AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until
the indicators
,
and
display is blank.
2. Press
• The indicators
,
and
• The indicator
flash.
• The display shows the current
setting:
activated.
3. Press
4. Press the on/off button to confirm
the setting.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The option XtraDry is not a permanent
option and must be selected at every
cycle.
How to activate XtraDry
Press
The related indicator comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
and
,
,
start to flash and the
.
,
go off.
continues to
= AutoOpen
to change the setting:
= AutoOpen deactivated.
.
until
,
,
,
,

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave