Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
30
Environmental concerns
2.
Remove the door from the pin (G). Un-
screw the pin (G) and screw it on the
opposite side.
3.
Remove the cover from the top of the
door and position it on the opposite
side. side.
4.
Refit the door.
5.
Fix the bottom hinge (E) on the opposite
side, using the screws previously re-
moved.
6.
Remove the cover (F) from the plinth (D)
by pushing it in the direction of the ar-
row and install it on the opposite side.
7.
Install the plinth (D), clipping it into
place.
8.
Unscrew the handle. Remove the plug
with a punch. Install the handle and the
plug on opposite side. Take from the ac-
cessory bag the two plugs and cover the
holes left open after having removed
the handle.
9.
Make sure that the front board of the
door is parallel to the front board of the
top.
10. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
ENVIRONMENTAL CONCERNS
The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
on the product or on its packaging indicates that this product may not be
G
180°
Advertenties
Hoofdstukken
Inhoudsopgave
