Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Delete all the programmed
radio transmitters on the
built-in radio control
It is possible to delete all programmed
channels.
a.) Connect the built-in dimmable radio control
correctly to a regular 230 VAC mains
network, as described in the section above.
b.) Press the button (2), until the LED (1)
flashes red.
c.) Before the LED (1) stops flashing, press the
button (2) on the built-in radio control again.
The LED (1) will go out and the delete
process has been completed successfully.
FUNCTION TEST
Connect the built-in dimmable radio control
correctly to a regular 230 VAC mains
network, as described in the section above.
You can now test the functioning of the
built-in radio control by briefly pressing the
corresponding 'ON' button on the relevant
switch channel. The red LED (1) will light up.
The switch contact on the central terminals
is now activated and the mains is connected
so a connected consumer will be switched
on. Press briefly on the 'OFF' button of
the corresponding switch channel on the
transmitter. The LED (1) will go off again,
the mains to the central terminals and thus
the connected consumer is switched off.
OPERATION
Connect a consumer to the switch contact.
SWITCH FUNCTION
For the permitted maximum output
of the consumer see the section on
'Technical data'.
EN
19
Advertenties
Inhoudsopgave
