Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
eNet
eNet tastafdekking met radiografische ontvanger
Manual commissioning
Allow extension unit operation On, Off
Settings, channel
Parameters
Manual commissioning
Operating mode
Local Operation
Manual switch-off of the run-
on time
Switch-on brightness
32582713
J0082582713
On, Off
Basic setting: On
Basic setting: On
Setting options, Basic set
ting
On, Off
Basic setting: On
Normal operation
Continuous on
Continuous off
Basic setting: Normal Operati-
on
On, Off
Basic setting: On
On, Off
Basic setting: Off
1...100 %
Basic setting: 100 %
5/10
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Prevents operation via wired
extensions.
Explanations
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Normal operation
The output can be operated
with radio transmitters, with
the button and with a connec-
ted extension.
Continuous on
The output switches to conti-
nuously "On". All operations of
radio transmitters, of the but-
ton and of connected extensi-
ons are ignored.
Continuous off
The output switches to conti-
nuously "Off". All operations of
radio transmitters, of the but-
ton and of connected extensi-
ons are ignored.
Blocks the output for operation
using the button.
Allows manual switch-off of a
running run-on time. If the
parameter is switched off, then
a switch-off command will also
switch the actuator on. This
parameter is directly connec-
ted to the "Run-on time" para-
meter.
During brief operation, the out-
put switches on at the set
switch-on brightness.
Note: If the value is above the
set maximum brightness or
below the minimum
brightness, then the system
will switch to the appropriate
limit value.
15.07.2016
Advertenties
Inhoudsopgave
