Download Print deze pagina

Audipack Screen-Crawler SC-200 Korte Handleiding pagina 2

Advertenties

Beschikbare talen

Beschikbare talen

SC-200 Screen-Crawler ®
The Screen-Crawler® is suitable for a max. load of 200 Kg on the hook.
The product is only suitable for lifting loads, connected / installed with proper certified hoist
gear.
User manual:
•Place the Screen-Crawler® only on flat surfaces, with sufficiënt grip. The surface must be
level.
•Place the Screen-Crawler ® at an angle of 70-75 degrees in comparison to the rigid wall.
•Pull the strap to telescopic extend the Screen-Crawler ® to the desired height.
•Secure the telescopic function of the product.
•The load must be suspended level and equal to the Screen-Crawler, always level!
•Make sure the hoist cable is organized neatly on the cable drum, do not bend the cable,
organize next to each other. Do not cross the cable on the drum.
•Always leave 3 complete windings left on the drum.
•Use the extension part instead of the wheels to generate more space between the hook and
wall.
Safety rules:
•The user must be trained and informed about the legal working conditions act, wearing
personal safety clothes, shoes etc. Extra attention not to walk below the Screen-Crawler.
•Do not install a ladder / scaffolding against the Screen-Crawler®.
•A load may never swing or be out of balance. At an offset position of the load re-install the
Screen-Crawler.
•Check before avery use the Screen-Crawler ® on damage, function, wear and tear or missing
parts, check the cable, telescopic lift function + safety and anti-slip feet.
•When fault are detected do not use the product and contact Audipack
•The Screen-Crawler ® must be checked every year by an epert on lifting devices; this for the
safety of the user and surrounding perons.
www.audipack.com
Industriestraat 2
2751 GT Moerkapelle
+31-795931671

Advertenties

loading