Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Charging the battery
Before using the fan, the integrated battery must be charged . When using a USB
mains adapter, the fan can also be used during charging . If the fan is being charged
via a USB port on a PC or notebook, simultaneous use is not recommended due
to the high power consumption . Make sure that at least two additional USB ports
remain free to prevent damage to the PC or notebook .
CAUTION
►
Charge the battery only in dry indoor areas .
►
If you do not want to use the appliance right away, remove the charging cable 8
after charging has been completed .
♦
Connect the USB-A plug of the charging cable 8 to a suitable USB power
supply (5 V/1 .5 A, not included) or a USB port on a PC or notebook .
♦
Connect the micro USB plug of the charging cable 8 to the micro USB charging
port 3 on the fan . The operating LED 6 lights up orange during charging . As
soon as the operating LED 6 goes out, the integrated battery is fully charged .
NOTE
►
If the operating LED 6 flashes blue while the fan is in use, the integrated
battery is exhausted and must be charged .
Handling and operation
Switching on/off and setting the speed
♦
Press the
♦
Press the
(low, medium, high) .
♦
Press the
The operating LED 6 goes out .
■
6
│
GB │ IE │ NI
button 5 to turn on the fan . The operating LED 6 lights up blue .
button 5 repeatedly to switch between the three speed levels
button 5 again to turn off the fan .
SVT 3.7 A1
Advertenties
Hoofdstukken
Inhoudsopgave
