Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
contact with the workpiece and can
also cause injury.
c) Do not apply excessive pressure
to the drill. Only apply pressure
lengthwise along the drill. Drills
can bend and break or cause a loss in
control, thus resulting in injuries.
3) Additional safety instructions
a) Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric shock
or fire.
Residual Risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.
Observe the safety informati-
on and notes on charging and
proper use as shown in the
instruction manual for your
battery and charger from the
Parkside X 20 V Team series.
A detailed description of the
charging process and further
information can be found in
the separate operating inst-
ructions.
Operation
Remove the battery from the
device to prevent accidental
operation. Risk of injury!
Ensure that the ambient tem-
perature does not exceed
50°C or fall below -20°C
during work.
Depending on whether you want to
use the drilling
ting mode, select the corresponding
operating mode on the device. See
also the chapter "Switching the slip
clutch on/off"
Checking the battery
charge level
Press the soft button (10) on the batte-
ry (11). The charge level of the battery (11)
is indicated by illumination of the corre-
sponding LEDs on the battery charge level
indicator (12).
red-yellow-green => Battery fully charged
red and yellow
=> Battery half charged
red
=> Battery needs
IE
or screw
opera-
to be charged
11
Advertenties
Hoofdstukken
Inhoudsopgave
