Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
28
www.aeg.com
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting.
3. Press
4. Press the on/off button to confirm
the setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
7. OPTIONS
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and
–
= rinse aid dispenser
deactivated.
–
= rinse aid dispenser
activated.
to change the setting.
Desired options must be
activated every time before
you start a programme. It is
not possible to activate or
deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
How to activate the acoustic
signal for the end of
programme
continues to
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
3. Press
4. Press the on/off button to confirm
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt and rinse aid from the respective
containers. The salt and rinse aid
indicators do not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
How to activate Multitab
Press and hold simultaneously
and
comes on.
hold simultaneously
until the indicators
and
and the display is blank.
.
• The indicators
off.
• The indicator
continues to flash.
• The display shows the current
setting:
–
= Acoustic signal off.
–
= Acoustic signal on.
to change the
setting.
the setting.
until the indicator
and
,
start to flash
and
go
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
