Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN - Instruction Manual Brew Monk Titan
2.4 Before Using the Brew Monk Titan
We advise to rinse the machine with 5-10 litre water. Clean the malt pipe (8), lter screens (7)
and overfow pipe (6), as well as the bazooka lter (12). To rinse the machine, you can use the
manual mode (see 2.5.1).
1. Make sure the ball valve (3) and the blue valve on the circulation pipe (2) are closed.
2. Plug in the device and pour 5-10 litre water in the kettle.
3. Turn on the power.
4. The display will indicate the temperature.
5. Press MANUAL button to select manual mode.
6. Use TEMP, POWER and TIMER buttons together with "+" and "-" to set temperature to 55°C,
time for rinsing to 5 min. and POWER to 2000 W.
7. Add cleaning agent (Chemipro
8. Press START.
9. Open the blue ball valve and switch on the pump (make sure that you install the curved pipe,
see 2.1).
10. When programme is done, switch off the pump and dispose of the hot water using the
ball valve (3).
11. The hot water can be used to clean the bazooka lter (12), malt pipe (8) and lter screens
(7) in the sink.
You are now ready to use the Brew Monk Titan!
2.5 Programme Setting
26
Wash).
®
=
BLANK PAGE
Advertenties
Inhoudsopgave
