Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9.4
ELECTRIC CONNECTION
Warning: the appliance must be installed by an authorized technician!
• The electric connection occurs through a cable with plug put in an electric socket which is able to support
charge and tension specific of every model, as described in the technical datas table (see FEATURES page
35).
• The plug must be easily accessible when the appliance is installed.
The cable must not get in touch with the fume exhaust pipe and nor with every other part
of the stove.
• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist
or if it is not efficient, please endow you with one in compliance with the law.
• Do not use extension cables.
• If the feeder cable is damaged, it must be replaced by an authorized technician.
• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the
socket on the wall.
9.5
CONNECTION TO THE EXTERNAL THERMOSTAT
The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an
external room thermostat. This operation must be executed by an authorized technician.
For connection see :
• external thermostat: set up a temperature which is round 7°C.
• External chronothermostat: set up a temperature which is round 7°C and desable the chrono functions from
the menu 03-01.
FAMILY
Fig. 14 - Embed cooking stove
EN
15
Advertenties
Hoofdstukken
Inhoudsopgave
