Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION AND CONNECTION
Changing the side on which the frozen compartment door opens
M
EN 16
1. Open the frozen compartment door a little. Using a small
screwdriver, press the spring in the opening of the lower door
bearing and remove the door.
2. Position the covering cap M on the opposite side.
3. Turn the frozen compartment door 180 degrees and fit the
lower door bearing into the lower bearing cavity of the frozen
compartment door.
4. Fit the door in the upper door bearing and at the same time insert
the lower door bearing into the square hole.
(if present)
Advertenties
Hoofdstukken
Inhoudsopgave
