Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
The appliance must be earthed. The power sup-
ply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is
not earthed, connect the appliance to a sepa-
rate earth in compliance with current regula-
tions, consulting a qualified electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Direc-
tives.
Door reversibility
Important! To carry out the following
operations, we suggest that this be made with
another person that will keep a firm hold on the
doors of the appliance during the operations.
To change the opening direction of the door, do
these steps:
• Open the door and empty the shelves
• Unscrew the screws of the upper hinge. (1)
• Remove the door from the middle hinge pivot.
(2)
• Place the cover of the upper hinge into the
holes on the opposite side.
• Screw off the screws of the middle hinge (3)
1
2
www.zanussi.com
All manuals and user guides at all-guides.com
• Remove the plugs on the upper side of both
• Remove the lower door from the lower hinge
• Screw off the pivot of the lower hinge (5) and
• Screw off the screws of the lower hinge and
• Screw off the lower cover plugs and screw
• Put the lower hinge on the opposite side and
• Place the lower door on the lower hinge piv-
• Screw off the middle cover plugs and screw
• Put the middle hinge on the opposite side
doors and move them to the other side.
pivot. (4)
4
screw the lower hinge pivot (6) into the left
drill of the lower hinge.
6
5
remove the hinge. (8)
them into the hole on the opposite side. (7)
fix it with the screws. (8)
7
8
ot. (9)
them into the hole on the opposite side. (10)
and fix it with the screws. (11)
25