Inhoudsopgave
Advertenties
Pre-scrub mode
The TTB-1840 has been designed to cope with a variety of floor types and different levels of soiling.
On heavily soiled floors use a 'double scrub' technique.
First pre-scrub the floor with the floor-tool in the raised position (Fig 21), allow the chemical time to work, then scrub
the area a second time with the floor-tool lowered.
To raise the floor-tool, ensure the floor-tool carrier is central to the machine (Fig 22).
Lift the lever near the base of the handle and lock into position (Fig 23).
!
Note
The lever moves upward and backward motion to lock the floortool in the raised position.
Floor tool in use
Fig 25
!
Note
Care must be taken to reduce speed when cornering or when manoeuvring around obstacles.
Machine Operation
Fig 21
The clean-water / chemical mix is dispersed via 'THRU-FEED'
system.
The waste water is then retrieved by the floor-tool
(see page 9).
Overlap the scrubbing path by 10cm to ensure an even clean
(Fig 24).
Fig 24
If streaking occurs, wipe the floor-tool blades clean (Fig 25).
233970 (Page 30) 04/11 (A03)
Fig 22
Fig 23
!
!
Advertenties
Inhoudsopgave
