Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAIN FUNCTIONS
[ SPEED ] BUTTON
To choose the 3 ventilating speeds in: LOW – MEDIUM – HIGH order. The led light turns on
according to your choice (show on the digital display
[ OSC ] BUTTON
Press the button (
) to start and stop the oscillation (show on the digital display
C
[ MODE ] BUTTON
Press the button (
) to choose the 2 ventilation modes. Press one time for NATURAL WIND
D
MODE and a second time for NIGHT MODE. Press a third time to disable and being in
normal mode.
– NATURAL WIND MODE: This function creates a breeze like a natural wind. It alternates
different ventilation cycles. When the mode are turns on you can choose the intensity in
changing the speeds:
• LOW Breeze: For an alternating of 75 sec ventilating cycles principally in a LOW speed
(show on the digital display
• MEDIUM Breeze: For an alternating of 75 sec ventilating cycles principally in a MEDIUM
speed (show on the digital display
• HIGH Breeze: For an alternating of 75 sec ventilating cycles principally in a HIGH speed
(show on the digital display
– NIGHT MODE: The LEDs of the digital display turn off and the speed ventilation decrease
progressively according to the start speed. Such as:
• With a LOW departure speed: still works in LOW speed (show on the digital display
+
).
c
• With a MEDIUM departure speed: the product works in MEDIUM speed during a half
hour and then still works in LOW speed (show on the digital display
• With a HIGH departure speed: the product works in HIGH speed during a half hour then
in MEDIUM speed during a half hour and still works in LOW speed (show on the digital
display
+
).
b
e
[ TIMER ] BUTTON
The product is equipped with a timer. You can program his stop from 1 hour to 8 hours. Press
several times the botton until the time appeared. (show on the digital display
ADDITIONAL FUNCTIONS
INSIDE DRYING OF THE APPLIANCE
Press the [TIMER] button during 3 secs for turn on the drying principal filter mode. This drying
works in HIGH speed during 20 min and stops. During this mode only the [ON/OFF] button works.
14
,
,
).
c
d
e
+
).
a
c
+
).
a
d
+
).
a
e
b
MAINTENANCE
• Make sure the unit is turned off and unplugged before any manipulation.
• Do not immerse the device in water or any other liquid.
• Do not use corrosive, abrasive or flammable products to clean the unit.
CLEANING THE FILTER
It's recommended to clean the principal filter every 2 months (more often if it's visibly dirty) the
).
f
dust accumulation could reduce the air flow.
1. Unplug the product.
2. Remove the filters in pulling in the 2 fixings.
3.Clean the principal filter with a soft detergent and a soft brush.
4. Be aware to replacing the principal filter entirely dry.
STOCKAGE
To avoid any bacteria or virus proliferation, never store the appliance with water
inside the tank and be sure that the appliance is perfectly dry.
1. Empty and clean the tank.
2. Dry the main filter using the INSIDE DRYING function.
3. Store the product in a place that is protected against dust and that is clean and dry.
FAQ
b
Problem
+
).
d
The appliance
does not work
Drop in the
).
E
appliance
performance
Abnormal noise
The air coming
out of the
appliance smells
bad
Reason
Solution
> The product is not correctly
plug or there is an electrical
> Plug the socket correctly and
problem.
check the voltage and the good
functioning of your electrical
> There is a problem on the
system.
electrical system of your
house.
> Leave at least 50 cm space
> The air inlet or outlet is
behind, on the sides and in front
blocked by something.
of the unit.
> Something obstructs the
> Make sure that no object
fan.
obstructs the air flow.
> The device has a
> Contact your reseller for service
functioning problem.
support.
> The water in the tank
> Empty the tank and wash and dry
is dirty (stagnant or
both parts before turning the unit
contaminated).
on again.
15
Advertenties
Inhoudsopgave
