Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PR166RKZ / PR167RKC
•
Make sure there is sufficient space to open the door.
•
This cooling unit is not intended for use as a built-in appliance.
•
Select a place with a strong, level floor.
•
Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating.
Heat sources nearby will cause higher electricity consumption.
•
Avoid very moist places. Too much moisture in the air will cause frost to form
very quickly on the evaporator, and your refrigerator.
•
Before connecting your refrigerator to the power supply, check that the
voltage stated on the rating label of your appliance corresponds to the voltage
in your home. A different voltage could damage the appliance.
•
After installation, leave the fridge-freezer for 24 hours before turning it on. This
way the refrigerant can settle.
•
Allow the appliance to run empty for 12 hours so the compartment can cool to
the appropriate temperature.
•
One can level the appliance using the adjustable legs. The adjustable legs can
be adjusted by screwing them in or out of the appliance.
TEMPERATURE CONTROL
The fridge is controlled with a temperature control knob located inside the
appliance.
Adjust the control knob as desired to suit your individual preference. The higher
the number, the colder the temperature. Position 4 is the recommended position
for normal use.
Depending on the ambient temperature and the contents used, we recommend
changing the setting to 5 or 6 (for more cooling) or setting 2 or 3 (if too cold).
We recommend waiting one day after adjusting the temperature to be able to
correctly assess it.
•
In the 0 position the appliance does not operate (the cooling system is
switched off ), but power supply is not interrupted.
Verhogen
Verlagen
USE
16
68
Advertenties
Inhoudsopgave
