Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Technical installation
STEP 1
STEP 2
Place the pump (4), sponge (19), filter media box (17), skimmer (2)
and filter sock (18) in the appropriate sections of the back
filter.
Read the manuals of the pump and skimmer before use.
STEP 3
Place the tank (1) on the bottom protector (15). Place aquarium on a
smooth, horizontal surface with an adequate load-bearing capacity.
Do not place the aquarium on electrical appliances or on furniture with
surfaces which are liable to staining by water.
Please note. The total weights of the set up: aquarium completely with
water and additives (depending on type of decoration) may be up to 240
kg.
STEP 4
STEP 5
STEP 6
Connect the pump
hose (12) between
the pump (4) and
the nozzle coupling
(10). Insert the
coupling from the
inside through the
appropriate opening
and then place the
nozzle (11) over it.
8
GB
MAX
Fill the tank and
filter with seawater.
MIN
You need to adjust
the water level in the
back filter when the
pump is running
between the
minimum and
maximum line.
Place the brackets
of the cover (13) on
the edge of the
aquarium and place
the glass cover (14)
on the brackets.
Place the lighting (6)
on the edge of the
aquarium and
secure the lighting
with the mounting
screws
Place the cover (16)
on the sump.
The Reef 160 is now
ready for use.
Advertenties
Inhoudsopgave
