Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.3 Technical data
Voltages:
Frequency:
Power:
Water tank:
Measurements:
Measurements
with filter holder:
Weight:
4
MACHINE INSTALLATION
The installation is to be carried out exclusively by qualified specialists and according to the following
instructions and in compliance with valid laws.
The following chapters deal with the preparation of the machine, its electrical connection, water supply connection
and drain connection.
4.1 Preparation for installation
• Place the machine on an even and stable surface. You can regulate the height by adjusting the feet
of the machine.
• Never place the machine on hot surfaces.
4.2 Electrical connection
• Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
4.3 Water supply connection
Important
Make sure that the water supply installation is connected to a potable water supply with an operating
pressure ranging from 0 to 1.5 bars. In case of an operating pressure of more than 1.5 bar use a
pressure regulator.
Please note that often the pressure of the water supply varies. If the water supply pressure temporarily
exceeds 1.5 bars, use a pressure regulator.
Instruction manual ELEKTRONIKA PROFI DUE
EU: 230 V
UK: 230 V
New Zealand: 230 V
Australia: 230 V
US: 115 V
EU: 50 Hz
UK: 50 Hz
New Zealand: 50 Hz
Australia: 50 Hz
US: 60 Hz
2,500 W
approx. 3.0 l
w x d x h / 581 mm x 475 mm x 444 mm
w x d x h / 581 mm x 580 mm x 444 mm
46 kg
22
ENGLISH
Advertenties
Inhoudsopgave
