Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3Trouble shooting
T r o u b l e s h o o t i n g
Fault
The appliance does not work
The appliance cannot be started
‚ƒ
:
‹‹
is flashing on the display
The interior lighting is not working
All food that is cooked in the oven
burns within an extremely short
period of time.
Door panels are steamed up.
Although the appliance is switched
on, it cannot be operated; the
'
symbol is shown on the display
The appliance door will not open; the
H
symbol is shown on the display
--------
Fault messages
If a fault message beginning with
display, set the function selector to "Off". If the fault
Fault message
"§§‚
"§§ƒ
"§§...
"§§†
"§§‡
"§§‰
--------
Replacing the oven light bulb
If the oven light bulb fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from
the after-sales service or from specialist retailers.
Please specify the E number and FD number of your
appliance. Do not use any other type of bulb.
:
Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
Allow the cooking compartment to cool down.
1.
Open the appliance door.
2.
Possible cause
The plug is not plugged into the mains
Power cut
The circuit breaker is faulty
The appliance door is not fully closed
The appliance is not switched off
Power failure
Top/bottom heating gentle mode is active
The bulb is faulty
Thermostat faulty.
This is normal and results from differences in temper-
ature.
The childproof lock is activated.
The appliance door remains locked until the cooking
compartment has cooled down.
appears on the
"§§
Possible cause
Temperature sensor failed.
The temperature in the cooking compartment is too
high.
Door locking mechanism incorrectly activated.
Fan heating element faulty or not connected.
Motor faulty or not connected.
Cooling fan faulty or not connected.
Notes/remedy
Connect the appliance to the power supply
Check whether other kitchen appliances are working
Check in the fuse box to make sure that the fuse for
the appliance is OK
Close the appliance door
Switch the appliance off and back on again
Reset the clock.
In top/bottom heating gentle mode, the interior light-
ing is not switched on.
Replace the bulb.
Call the after-sales service.
Heat the appliance up to 100 °C and then switch it
back off after 5 minutes.
Press and hold the
'
symbol goes out.
Wait until the
message does not disappear, please contact our after-
sales service.
Information/remedy
Call the after-sales service.
Call the after-sales service.
Call the after-sales service.
Call the after-sales service.
Call the after-sales service.
Call the after-sales service.
Place a tea towel in the cooking compartment to
3.
prevent damage.
Remove the shelf supports.
4.
Remove the glass cover.To do this, open the glass
5.
cover from the front with your hand. Should you
experience difficulties removing the glass cover, use
a spoon to help you.
Remove the oven light bulb.
6.
Trouble shooting
c1
touch button until the
H
symbol goes out
en
43
Advertenties
Hoofdstukken
Inhoudsopgave
