Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Setting up your aquarium:
Choose an appropriate location for the aquarium. The location should be relatively dark, for example
in the corner of a room. The aquarium should not be exposed to direct sunlight. Too much light will
lead to unwanted algae and may harm the fish and plants in the aquarium as a result of overheating.
Step 1
Step 2
Step 3
Step 4
4
Place aquarium on a smooth, horizontal surface with an adequate
load-bearing capacity. Do not place the aquarium on electrical
appliances or on furniture with surfaces which are liable to
staining by water. Please note the total weights of the set up
aquaria with water and accessories: Home 30 Pro LED ± 40 kg,
Home 65 Pro LED ± 80 kg and Home 85 Pro LED ± 100 kg.
Clean the aquarium and accessories thoroughly with clean tap
water and rinse the aquarium completely clean. Never use
cleaning products or alcohol and always use a perfectly clean
bucket. Cover the bottom with clean aquarium gravel of your
choice. For plant aquariums, first add a nutrient substrate and
then cover it. When placing heavy rocks into the aquarium, they
must have support, like foam eg, otherwise the rocks could cause
breakage of the aquarium (no warranty coverage).
First read the Aqua-Flow filter manual. Next install the Aqua-Flow
filter into the filter compartment. You can hide the cord between
the ribs of the side panel.
Your aquarium filter helps to keep the water healthy therefore you
need to clean it weekly. Click the cartridge from the filter and rinse
it with fresh tap water. The cartridge contains active filter carbon
that absorbs harmful substances from the water therefore you
need to replace the cartridge monthly.
For tropical fish and tropical shrimp you need to use an aquarium
heater. The Home Pro LED design incorporates a space in the filter
compartment where you can install a heater. We recommend a
SuperFish Heater 50 W for the Home 30 Pro LED and a SuperFish
Heater 100 W for the Home 65 Pro LED and 85 Pro LED. Press out (if
necessary) the round plate at the bottom of the filter
compartment so that you can install the heater. You can hide the
heater's cord between the ribs of the side panel.
First carefully read the heater manual before usage!
With the optionally available SuperFish LED Controller, you can
automatically switch the LED lighting on and off at times of your
choice. You can also dim the LED lighting.
GB
Advertenties
Inhoudsopgave
