Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Removing the Battery
PLEASE NOTE!
■
The main unit may only be opened for the disposal of the battery.
■
The battery must not be taken apart, thrown into a fire, immersed in liquids or short
circuited.
This device contains a built-in battery, which must be removed prior to disposal of the
used device.
1. The battery compartment is located in the main unit. Undo the screws.
2. Open the main unit, you may need to employ a little force or a tool (e.g. screwdriver).
Take care when opening the main unit, short-circuits must be avoided.
3. Undo the clip on the connecting cable and take out the battery.
Technical Data
Article numbers:
ID operating instructions: Z 02304_02930 M DS V10 1023 as
Device
Model:
Voltage supply:
Power:
Input:
Charging time:
Operating time:
Type of protection:
Capacity:
Mains adapter
Model:
Voltage supply:
Output:
Protection class:
Type of protection:
24
02304 (yellow); 02930 (turquoise)
HL3202
3.7 V DC (1 x Liion battery 1500 mAh, 18650 type)
10 W
5 V DC 600 mA
approx. 3 – 3.5 hours
approx. 20 – 28 minutes
IPX6
100 ml
BI05L050060AdV
100 – 240 V ~ 50 / 60 Hz 0.3 A
5 V DC 0,6 A
II
IP20
All rights reserved.
Advertenties
Hoofdstukken
Inhoudsopgave
