Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.4 Defrosting of the freezer
The freezer compartment of this model,
on the other hand, is a "no frost" type.
This means that there is no buildup of
frost when it is in operation, neither on
the internal walls nor on the foods.
7. WHAT TO DO IF...
CAUTION!
Before troubleshooting, discon-
nect the power supply.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
Problem
The appliance is
noisy.
The compressor op-
erates continually.
Water flows on the
rear plate of the re-
frigerator.
Water flows into the
refrigerator.
All manuals and user guides at all-guides.com
Possible cause
The appliance is not sup-
ported properly.
The Temperature regula-
tor may be set incorrectly.
The door is not closed
correctly.
The door has been
opened too frequently.
The product temperature
is too high.
The room temperature is
too high.
The FROSTMATIC func-
tion is switched on.
The COOLMATIC func-
tion is switched on.
During the automatic de-
frosting process, frost de-
frosts on the rear plate.
The water outlet is clog-
ged.
Products prevent that wa-
ter flows into the water
collector.
The absence of frost is due to the con-
tinuous circulation of cold air inside the
compartment, driven by an automatically
controlled fan.
There are some sounds during
normal use (compressor, refriger-
ant circulation).
Solution
Check if the appliance
stands stable (all the four
feet should be on the
floor).
Set a warmer temperature.
Refer to "Closing the
door".
Do not keep the door
open longer than necessa-
ry.
Let the product tempera-
ture decrease to room
temperature before stor-
age.
Decrease the room tem-
perature.
Refer to "FROSTMATIC
function".
Refer to "COOLMATIC
function".
This is correct.
Clean the water outlet.
Make sure that products
do not touch the rear
plate.
ENGLISH
39
Advertenties
Hoofdstukken
Inhoudsopgave
