Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Before Initial Use
1. Remove any possible films, stickers or transport protection from the device. Never
remove the rating plate or any warnings!
2. Clean the accessories before you first use them as they may have possible produc-
tion residues on them. To do this, follow the instructions in "Cleaning and Storage".
Setting Up the Device
PLEASE NOTE!
■
Make sure that the connecting cable is not squashed, bent or laid over sharp edges
and does not come into contact with hot surfaces.
■
The connecting cable should not hang down from the surface on which the device is
placed in order to prevent the device from being pulled down.
1. Place the device with sufficient clear space above it and on all sides on a dry, flat and
solid surface. Be aware that there must be sufficient clear space above to allow the
mixer head (11) to be flipped up.
2. Make sure that the suction cups (6) stick to the surface correctly.
Inserting / Removing Accessories
PLEASE NOTE!
■
The device must be switched off when the tilting mixer head is being flipped up or
down.
■
Switch off the device and pull the mains plug out of the plug socket before changing
any attachments.
■
Make sure that the inserts are not mixed up for use. Only either the dough hooks or
the stirrers may be used at any one time.
Mixer head
Before inserting or removing any accessories, the mixer head (11) must be put up:
Press the release lever (2) with one hand and at the same time use your other hand to
flip up the mixer head.
To flip the mixer head down again, press the release lever again.
Mixing Bowl
Inserting: Place the mixing bowl (9) on the turntable (8). Hold the turntable firmly and
rotate the mixing bowl as far as it will go clockwise (towards the
Removing: Hold the turntable firmly and twist the mixing bowl anticlockwise (towards the
symbol) until it is released.
01920_DE-EN-FR-NL_A5_V1.indb 17
17
EN
symbol).
04.02.2020 14:00:21
Advertenties
Hoofdstukken
Inhoudsopgave
