Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
c. Air outlet filter
1. Open the air outlet filter cover.
2. Take out the air outlet filter for cleaning and changing.
Please note:
The filters in the cleaner will became dusty over time. This is normal and will not affect the performance of
the filter. If the filters are so dusty that suction does not return to 100%, we suggest that the filters be
removed then rinsed under the faucet and allowed to dry for 24 hours by airing not near the fire or some
high temperature objects before refitting into the vacuum. This should be done once six months or when
suction appears to be reduced obviously.
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat
and could become damaged.
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters
must be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical
outlet when checking the filters.
If the suction power of the vacuum cleaner gets low please check the hose for obstacles.
You can open the hose by pressing the square part on the hose handle. Take apart the two parts and
remove any obstacles.
To assemble the hose again first press the flexible hose into the handle and then click in the connection
part.
Hepa air outlet filter
- 15 -
Advertenties
Inhoudsopgave
