Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Manual - DMX Tool 3
SETUP NO-DMX FUNCTION
Set the behavior of the Ekspoled when no DMX
signal is received by the device.
1.
Connect the DMX-Tool 3 to one or more
Ekspoleds. All Ekspoleds in the DMX circuit
will receive the new setting.
2.
In the main menu, choose "UCS SET".
3.
Select the corresponding set for your Ek-
spoled. For Ekspoled 200 RGB CCT DMX,
choose "UCS512G6". For Ekspoled 200 CCT
DMX, select "UCS512H4".
Advertenties
Inhoudsopgave
