Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Maintenance
Live components may be exposed if the covering is opened or components are removed.
Prior to start of maintenance or repair works, the device must be disconnected from all voltage
sources.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all voltage sources.
Repairs may only be carried out by qualified personnel who are familiar with the hazards
involved and the relevant regulations.
This device is servicing-free. The outside should only be cleaned with a soft, dry cloth or a brush.
Never use caustic cleaning agents or chemical solutions as the surface of the housing could be damaged.
Troubleshooting
In purchasing the Mc Crypt DJ/USB Mixer USB-100, you have acquired a reliable product which has been designed
using state-of-the-art technology.
Nevertheless, problems or faults may occur.
Therefore, we would like to describe here how to eliminate possible faults:
Please observe the safety instructions!
Device does not work after the on/off switch (12) has been switched on.
•
The power pack unit has not been plugged into the socket correctly
•
The mains socket is not supplied with current
The mixer is turned on but no tone can be heard.
•
No input signal;check signal source.
•
Wrong input selected; select proper input.
•
Input level wrongly set; adjust level as described at „Setting the volume".
•
Downstream device (amplifier) not switched on or incorrectly set
•
The output is not or wrongly connected.
There is a humming sound.
•
The record-player earth cables are not connected to the ground screw GND (18).
•
A buzz loop arises between the connected devices Connect the signal mass with special ground-insulated
cables.
34
Advertenties
Hoofdstukken
Inhoudsopgave
