Mulching The Clippings; Bagging The Clippings; Installing The Grass Bag - Toro 20899 Handleiding
Verberg thumbnails
Zie ook voor 20899:
- Gebruikershandleiding (25 pagina's) ,
- Gebruikershandleiding (24 pagina's) ,
- Gebruikershandleiding (24 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Mulching the Clippings
Your machine comes from the factory ready to mulch
the grass and leaf clippings back into the lawn.
If the grass bag is on the machine, remove it; refer to
Removing the Grass Bag (page 13)
the clippings. If the side-discharge chute is on the
machine, remove it and lock the side-discharge
deflector; refer to
Removing the Side-Discharge Chute
(page 14)
before mulching the clippings.
Important:
The machine has a safety switch that
prevents you from starting the machine unless
you first install the mulch plug securely on the
machine
(Figure
26).
Install the mulch plug as illustrated in
Figure 26
1. Top of mulch plug lever in switch channel
All manuals and user guides at all-guides.com
Bagging the Clippings
Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
before mulching
A worn grass bag could allow small stones
and other similar debris to be thrown at you
or bystanders, resulting in serious personal
injury or death.
Check the grass bag frequently. If it is
damaged, install a new Toro replacement bag.
If the side-discharge chute is on the machine, remove
Figure
26.
it and lock the side-discharge deflector; refer to
Removing the Side-Discharge Chute (page 14)
bagging the clippings.
The blade is sharp; contacting the blade can
result in serious personal injury.
Shut off the engine and wait for all moving
parts to stop before leaving the operating
position.
Installing the Grass Bag
g005324
12
WARNING
WARNING
1.
Remove the mulch plug
Figure 27
2.
Route the starter rope around the lower-rope
guide
(Figure
28).
before
(Figure
27).
g005309
Advertenties
Hoofdstukken
Inhoudsopgave
