Cleaning and user maintenance
shall not be made by children
without supervision.
Ensure the rated voltage shown
on the rating label corresponds
with the voltage of the power
supply.
Do not operate any product with
a damaged power cord or plug,
when the product malfunctions
or has been damaged in any
manner.
Only use the product in dry
indoor rooms.
Do not operate the product with
wet hands or while standing on a
wet floor. Do not touch the power
plug with wet hands.
Protect the product against heat.
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances.
Do not insert fingers or foreign
objects in any opening of the
product and do not obstruct the
air vents.
Regularly check the power plug
and power cord for damage.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Protect the power cord against
damages. Do not let it hang over
sharp edges, do not squeeze or
bend it. Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally.
If the power cord should
overheat, stop using the product
and disconnect the product from
the electrical outlet.
Do not pull the power plug out of
the electrical outlet by the power
cord. Do not wrap the power
cord around the product.
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water.
For safety reasons, it is
recommended not to remove the
safety grille/guard. However, if
you need to remove it, ensure that
the product is switched off from
the supply mains before removing
the grille/guard.
Never use the product without the
safety grille or with a damaged
safety grille.
Place the product on a firm, level
and stable surface to prevent
overturning during operation.
GB/IE/NI
9