Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UK
Humidity Setting Control
A
Press the Humidity setting button (A) to select the desired maximum level of humidity
between the following CO-30%-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-CO. CO
stands for continuous non-stop dehumidification. If you select one of the percentages,
then the unit will run until that level is reached. And if the humidity is below the selected
percentage, the unit will not run.
When the humidity in the room falls below the set value, the dehumidifier automatically
turns off. The dehumidifier automatically restarts when the humidity exceeds the set
value.
If the ambient humidity is lower than 30% the display will show LO
If the ambient humidity is higher than 90% the display will show HI
Timer Setting
A
When the unit is turned on, press the Timer button (A) and select between 1-24hr to
select your preferred timer duration before automatic shutoff setting. The timer indicator
will be activated on the display.
92
MV-2580-2581-04-2024 eeese-aircare.com © All rights eeese air care aps
Advertenties
Inhoudsopgave
