2. tu r ning o n the a p p li a n ce
–
Put back the cover with the two outlet nozzles on the water tank resp. the
appliance. Check if outlet nozzles are positioned correctly.
nOTE: The two-part and fully rotating outlet nozzle can always be set individually
for optimal humidity dispensation (fig. 7).
–
Plug the power plug into a suitable power outlet. A signal will sound and your
appliance is in standby mode.
–
Press the ON/OFF switch. The LED display will illuminate and your appliance will
start up (fig. 8).
–
Now, press the function buttons you wish to activate. If you press no other
button, your appliance will work with the highest warm mist setting and with
nebulisation setting
fig. 7
3. ac t i V at in g t he a ro ma Fu n c t i o n
–
Due to the sponge placed in the aroma compartment, your SOLIS Ultrasonic Hybrid
can diffuse pleasant fragrance.
–
Remove the aroma compartment from the base.
–
Drizzle a few drops of water-soluble aroma oil onto the
sponge (fig.10).
–
Slide the aroma compartment back into the base.
–
When you turn on your air humidifier, the aroma function
will be activated.
–
If you want to deactivate the aroma function, or should the appliance not be
in use for extended periods of time, remove the aroma sponge from the com-
partment and wash it with a little of mild soap water. Let it dry completely
before placing it back in the aroma compartment. Basically, the aroma sponge
is reusable.
cAUTIOn: Never put additives like essential oils or perfumes into the tank resp. the
water! This would cause damage to your appliance!
66
(fig. 9).
"
fig. 8
fig. 9
fig. 10