IGNITING INSTRUCTIONS
NOTE: It is not always necessary to use all burners. This depends on the type of cooking and the amount of food.
IGNITING THE MAIN BURNERS
DUALCHEF 315 G / DUALCHEF 325 G / DUALCHEF S 325 G
DUALCHEF 415 G / DUALCHEF 425 G / DUALCHEF S 425 G
1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are firmly tightened. (Follow the instruc-
tions in the CHECKING FOR LEAKS chapter.)
2. Switch on the master switch at the electrobox (ON = red checklamp on the master switch will light up).
3. Open the barbecue lid. CAUTION: Never ignite the barbecue when the lid is closed.
4. Open the gas supply at the gas bottle.
5. Press the gas regulating knob of the DGS
tion button and hold it until the spark catches fire and the gas is burning.
6. If the gas does not ignite within 3 seconds, set the gas regulating knob to
repeat points 4 to 5.
7.
If it is not possible to ignite the barbecue after 3 attempts, check the causes (as described in the TROUBLESHOOTING section).
IGNITING THE SIDE BURNER
DUALCHEF 325 G / DUALCHEF S 325 G / DUALCHEF 425 G / DUALCHEF S 425
1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are firmly tightened. (Follow the instruc-
tions in the CHECKING FOR LEAKS chapter.)
2. Switch on the master switch at the electrobox (ON = red checklamp will light up).
3. Open the cover plate at the side burner of the DUALCHEF 325 G / DUALCHEF S 325 G / DUALCHEF 425 G / DUALCHEF S 425 G.
CAUTION: Never ignite the side burner when the cover plate is closed.
4. Open the gas supply at the gas bottle.
5. Press the gas regulating knob marked SIDE BURNER and turn it anticlockwise to the
until the spark catches fire and the gas is burning.
6. If the gas does not ignite within 3 seconds, set the gas regulating knob to
repeat points 4 to 5.
7.
If it is not possible to ignite the side burner after 3 attempts, search for the causes (as described in the TROUBLESHOOTING section).
TWIN BURNER you want to start and turn it anticlockwise to the
®
23
. Wait 2 minutes to allow the uncombusted gas to dissipate. Then
setting. Press the ignition button and hold it
. Wait 2 minutes to allow the uncombusted gas to dissipate. Then
position. Press the igni-