Spa Pump Equipotential Bonding Terminal - Bestway Lay-Z-Spa Handleiding
Verberg thumbnails
Zie ook voor LAY-Z-SPA:
- Gebruikershandleiding ,
- Handleiding (28 pagina's) ,
- Gebruikershandleiding (241 pagina's)
Inhoudsopgave
Beschikbare talen
Beschikbare talen
PRCD TEST
SPA PUMP EQUIPOTENTIAL BONDING TERMINAL
It is recommended to arrange for a qualified electrician to connect
the spa pump to an equipotential bonding terminal using a
minimum 2.5mm
When inflating, you will notice that air will be expelled
from the area where the air hose connects to the
pump, this is normal for technique requirements.
Important: Don't cover the holes on the base of the
inflation hose. This operation will over inflate the liner
and damage the structure.
Do not use an air compressor to inflate the pool.
Do not drag the pool on rough ground as this may cause damage to the pool liner.
Inflation time for reference only.
TEST
RESET
TEST
RESET
2
solid copper conductor.
1
3
18
TEST
RESET
TEST
RESET
2
4
Hoofdstukken
Inhoudsopgave
Probleemoplossen
