Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
REGULAR USE:
The control panel
1.
1. Timer (0~120 min.)
2. Timer indicator light
3. Temperature indicator light
4. Temperature controller (50ºC~250ºC)
2.
Turn on the convection oven
• Set the timer knob to the the cooking time according to the time you
are going to cook.
• The thermostat can be used to automatically set a constant
temperature between 50°C and 250°C.
• Set the timer by turning it clockwise.
Set the temperature control to the desired temperature.
The temperature light, (timer indicator light), and the inside lamp are on.
The temperature light will be off when the temperature rises to the
desired temperature.
• Attention! The oven will not work if the timer is not set.
3.
How to use the timer.
• The timer can be set between 0~120 minutes
• Set the timer by turning it clockwise.
The timer light and the inside lamp are on.
• The oven will turn off automatically at the end of the selected time
and a bell will ring for 1-5 seconds.
• The desired time depends on the food to be prepared.
• The oven can be turned off manually by turning the timer counter-
clockwise to the "0" position. Only then unplug the power cord.
Do this at all times in the order described. This prevents a short circuit
or other possible danger.
• When disconnecting the device, never pull on the cord, only on the
plug.
• To avoid any risk of fire, never leave the plug in the socket after use.
• When moving the appliance, do this by lifting the appliance from the
bottom.
688011 G20NE
Figure 3: The control panel
8
Advertenties
Inhoudsopgave
