Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Display
+ digit
/
/
4.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
As long as the indicator is
on, there is a risk of burns from residual
heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The indicators
/
cooking zone is hot. They show the level of
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Operating the hob
You operate the hob with the knobs of the
oven and control panel of the hob. Refer to
"Daily use" in the oven user manual.
5.2 PowerBoost
This function makes more power available to
the induction cooking zones. The function can
be activated for the induction cooking zone
only for a limited period of time. After this time
the induction cooking zone automatically sets
back to the highest heat setting.
46
ENGLISH
Description
PowerBoost operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐
ual heat.
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
/
appear when a
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
Refer to "Technical data" chapter.
To activate the function for a cooking
zone: touch
.
To deactivate the function: change the heat
setting.
5.3 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for
some time and then decreases to the correct
heat setting.
comes on.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
