Download Inhoudsopgave Inhoud Print deze pagina

Care And Maintenance - Weller Laser Line 200V Vertaling Van De Oorspronkelijke Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 53

Care and maintenance

Filter change
Warning!
Before doing any work on
the machine, pull the plug
out of the socket.
Use original replacement
parts only.
Contaminated filters must be
treated as special waste.
Dispose of replaced equip-
ment parts, filters or old
devices in accordance with
the rules and regulations
applicable in your country.
MIN 1x
year
Symbols
Caution!
Read the operating instructions!
Before performing work of any kind
on the unit, always disconnect the
power plug from the socket.
ESD-compatible design and
ESD-compatible workstation
CE mark of conformity
British Conformity Mark
To ensure that the filtration system functions properly, the filter must
be replaced as follows
at least once a year or
if the maximum allowable workplace concentration is exceeded or
as per maintenance schedule
The degree of clogging of the filter is determined by differential pres-
sure measurement. The filter display indicates the current filter status
Red = filter full
Yellow = filter status > 80%
Green = filter status < 80%.%.
When the filter is used up, an audible signal sounds
once an hour
every half hour after 36 hours
every 10 min after 54 hours
continuously after 72 hours.
The suspended matter filter and the broadband gas filter are
complementary to one another and can be replaced together as a
compact filter. The compact filter must be changed once a year in
order to ensure it is fully functional. The fine dust filter (pocket filter)
is the preliminary stage of the compact filter and therefore must be
replaced more frequently. It is sufficient to replace the pocket filter if
the red LED does not come on after restarting the unit.
Disposal- UK
Do not dispose of electric tools
together with household was-
te material! In observance of
European Directive 2012/19/EU
on waste electrical and electronic
equipment and its implementation
in accordance with national law,
electric tools that have reached the
end of their life must be collected
separately and returned to an en-
vironmentally compatible recycling
facility.
Disposal
Do not dispose of electric tools to-
gether with household waste material!
In observance of European Directive
2012/19/EU on waste electrical and
electronic equipment and its imple-
mentation in accordance with national
law, electric tools that have reached
the end of their life must be collected
separately and returned to an environ-
mentally compatible recycling facility.
Contaminated filters must be treated
as special waste.
Dispose of replaced equipment parts,
filters or old devices in accordance
with the rules and regulations appli-
cable in your country.
21

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Laser line 400vFt91001699Ft91002699

Inhoudsopgave