Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Safety instructions
Read all of these instructions before using this product and save this information
1.1.
General instructions
1.
Use in a safe environment: There must be
no risk of explosions, corrosive products in
the surrounding environment during use.
2.
Consider the environment of the work area:
Do not expose the tool to rain. Do not use the
tool in damp, wet places or places where there
is a risk of splashing water. Keep the work area
well lit. Do not use tools in the presence of
flammable liquids or gases.
3.
Maintain a clean and orderly working area:
The working area must be visible from the
working
position.
workbenches are prone to accidents
4.
Keep other people away: Do not leave people,
including children, unaffected by the work in
progress, touch the tool or extender, and keep
them away from the work area, be especially
vigilant with children and animals.
5.
Store unused tools: Unused tools should be
stored in a dry or locked place out of the reach
of children.
6.
Do not force the tool: A tool gives better
results in a safer way at the speed, at the power
for which it was designed.
7.
Use the appropriate tool: Do not force a small
tool or accessory to perform the work of a larger
size. Do not use the tool for any purpose for
which it is not designed.
8.
Use protective equipment: Use safety goggles,
a normal or dust mask if the work operations
generate dust, protective gloves (if there are no
moving or rotating parts).
1.2.
Special instructions
1. Never point the tool at yourself or others
2. Never use the tools for any purpose other than that for which they are known
3. The tool should always be disconnected when not in use
4. Keep tools out of reach of children
5. Max pressure: 12 bar
2. Overview
Technical specifications
SODISE, 85 route de Pont Gwin - 29510 Briec - FRANCE
Messy
areas
and
9.
Don't lean too much: Maintain good support
and balance at all times.
10. Treat tools with care: Keep tools clean to
optimize
work
and
instructions
for
lubrication
accessories.
Examine
periodically, if necessary, have their repair
carried out by an approved maintenance
station.
11. Stay alert: Focus on work. Use good judgment.
Do not use the tool when tired.
12. Check for damaged parts: Before using the
tool, carefully examine the condition of the parts
to ensure that they are functioning properly and
are performing their task. Check the alignment
and freedom of operation of the moving parts,
the condition and fitting of the parts and any
other conditions that may adversely affect
operation. Any parts in poor condition shall be
repaired or replaced by an authorized service
station unless otherwise specified in this
instruction manual.
13. Do not modify the machine: No modifications
and/or reconversion must be carried out. Use of
accessories or attachments other than those
recommended in this instruction manual may
result in personal injury.
14. Have the tool repaired by a specialist
15. Keep the handles dry, clean, and free of
lubricant and grease.
16. Stay alert: Watch what you are doing, use
common sense and do not use the tool when
tired.
17. Warning: The use of any accessories or
attachments other than those recommended in
this instruction manual may present a risk of
injury to persons.
6
NIU 06572 V1.3
safety.
Follow
the
and
changing
their
condition
Advertenties
Inhoudsopgave
