Advertenties
Beschikbare talen
Beschikbare talen
MILES 1000L
EN
Introduction
Congratulations on your purchase. AXI makes every effort to design and manufacture a robust and safe product. With this
choice, you have purchased a product that you will enjoy for years to come.
Before use, make sure all accessories are connected according to the recommended instructions in this manual.
Assembly
Quick & Easy assembly
Ridge reinforced walls
Available in various sizes
Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructi-
ons before you begin. During assembly, follow the step sequence carefully for correct results .Please be aware: this unit takes
two people about 1.5 hours to complete.
Before you start
Prior to installation, it is important that you contact your local government authority determine if building approval is requi-
red. Study and understand this owner's manual. Important information and helpful tips will make your construction easier
and more enjoyable.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during construction. These are packaged within the carton.
Note that extra fasteners have been supplied for your convenience.
Assemble according to the instructions supplied with the product. Always assembly your product on flat, even surface and
always according to the instruction. During the assembly, loosely fit the screws at first, fastening then tight only when fully
assembled. Check furniture fittings at least once a year - the screws may require tightening.
If possible, two or more people should assemble the product. One person can position parts while the
other hands the fasteners and tools.
Site selection
Avoid overhanging trees as much as possible, since leaves require regular cleaning required and broken
branches are a potential hazard. Small trees, bushes, or fences nearby can be helpful and serve as windbreaks.
Allow enough time: If you are in a hurry, mistakes will happen and the assemblies may be assembled incorrectly. If you have
never built a product like this before, it may take longer to assemble.
Use the right tools.
Ideally, have the parts ready and check to make sure they are all there before you start building
begin. Place them on cloths or plastic sheeting if there is a risk that the parts will be scratched.
Tighten all nuts carefully and don't miss any. Check that the base frame is square. Use a spirit level that the product is moun-
ted vertically.
Safety
For domestic use only. When assembling and using - always use on firm level ground. Periodic structural checks of this pro-
duct should be undertaken, do not use if you have any doubts its fitness for purpose.
Do not sit or stand on the product at any place.
Important notes
Find someone to help you: it is much easier with someone to hold parts,pass tools etc. Also some steps require two people to
lift structures together.This is not very heavy work so would suit most able-bodied people.
Allow plenty of time: rushing often causes errors and the re-doing of incorrect assemblies. If you have never built a shed
before, it can take most of a day to carefully complete the construction.
Have the right tools to hand.
Ideally lat out the parts and check that all are present before commencing construction. Lay on cloths or plastic sheets if the-
re is any risk of scratching the parts.
Tighten all nuts carefully, being sure not to miss any.
Maximum load of lid: 50kg
When closing the box, gently press the lid
12
Advertenties
