Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UK
5.2
Connection to the pool (figure 10)
1. Skimmer: Connection from the skimmer to
the pump. The suction hose that takes the
uncleaned water from the pool (pool skimmer)
to the pump must be fitted to the pump's inlet
nozzle with hose clamps.
2. Return: The hose that takes the cleaned
water back to the pool must be fitted to the
return nozzle on the filter tank.
All hoses should be properly fixed with hose
clamps. Any leakage can be remedied by using
tape on the thread.
Fill the pool with water – ensure that the
water line reaches the middle of the pool
skimmer opening.
Now the system can be started up.
56
MV-1087-11-2021 . © Alle rettigheder forbeholdes Swim & Fun A/S
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
