Download Inhoudsopgave Inhoud Print deze pagina

Initial Installation - Berger LED Smart Camping-TV Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

GB

6. INITIAL INSTALLATION

If you want to use the pre-installed channel list for DVB-S/S2 (satellite reception), you do not
need an initial installation and should skip this point.
The initial installation starts with the welcome screen.
Confirm this screen with the „OK" key and you
will automatically be taken to the next screen.
Next, select the language. All menu and
interface texts are displayed in this language.
Confirm this screen with the „OK" key and you
will automatically be taken to the next screen.
Then select the Internet connection. To do this,
navigate with the arrow keys to the WLAN sym-
bol at the top left or the globe below for LAN.
Confirm the selection with OK and then either
select the desired WLAN from the list and enter
the password or, for LAN, enter the IP address.
Confirm this screen with the „OK" key and you
will automatically be taken to the next screen.
You can also skip this step and set up the
Internet connection later under „Settings". You
must also enter any changes there - e.g. the
WLAN of a campsite.
Finally, select the country for which you want to
set up the TV. Germany is preset [blue tick].
42

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

340970359320359800359810359820

Inhoudsopgave