Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. EINHELL Handleidingen
  4. Waterpompen
  5. GE-SP 4390 N-A LL ECO
  6. Originele handleiding

Troubleshooting Guide - EINHELL GE-SP 4390 N-A LL ECO Originele Handleiding

Helderwater
Verberg thumbnails Zie ook voor GE-SP 4390 N-A LL ECO:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 69

11. Troubleshooting guide

Faults
The equipment
does not start
The equipment
does not pump
The equipment
does not cut out
Insuffi cient pumping
rate
The equipment swit-
ches off after briefl y
running
Anl_GE-SP_4390_N-A_LL_ECO_SPK9.indb 23
Anl_GE-SP_4390_N-A_LL_ECO_SPK9.indb 23
GB
Cause
- Power supply not connected
- Observe the autostart level
- Intake sieve clogged
- Discharge hose kinked
- Observe the autostart level
- Intake sieve clogged
- Performance reduced due to heavi-
ly contaminated and abrasive water
impurities
- Motor circuit-breaker switches the
equipment off due to excessive wa-
ter contamination
- Water temperature too high; motor
circuit-breaker switches the equip-
ment off
- 23 -
Remedy
- Check power supply
- Turn the autostart level to the cor-
rect position
- Clean intake sieve with water jet
- Unkink the hose
- Turn the autostart level to the cor-
rect position
- Clean intake sieve
- Clean equipment and replace wear
parts
- Unplug power plug and clean
equipment and shaft
- Ensure that maximum permissible
water temperature (35 °C) is not
exceeded
12.02.2019 10:05:29
12.02.2019 10:05:29

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor EINHELL GE-SP 4390 N-A LL ECO

Gerelateerde Producten voor EINHELL GE-SP 4390 N-A LL ECO

Deze handleiding is ook geschikt voor:

41.714.4011016

Inhoudsopgave