Download Inhoudsopgave Inhoud Print deze pagina

Troubleshooting; Technical Data - ZANKER KEV6043FBB Gebruiksaanwijzing

Verberg thumbnails Zie ook voor KEV6043FBB:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Scratches or dark stains on the surface have no
effect on how the hob operates.
Use a special cleaner applicable for the surface of
the hob.
Use a special scraper for the glass.
Cleaning the hob
Remove immediately: melted plastic, plastic foil,
sugar and food with sugar. If not, the dirt can cause
damage to the hob. Take care to avoid burns. Put

Troubleshooting

Warning! Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate the
hob.
Residual heat indicator does not
come on.
There is a dark area on the
multiple zone.
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Make sure, you
operated the hob correctly. If not the servicing by a

Technical data

Rating plate
Model KEV6043FBB
Typ 60 AAD 65 ZO
Ser.Nr. .................
ZANKER
the special scraper on the glass surface at an acute
angle and move the blade on the surface.
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny metallic
discoloration. Clean the hob with a moist cloth and
non-abrasive detergent. After cleaning, wipe the hob
dry with a soft cloth.
Remove shiny metallic discoloration: use a
solution of water with vinegar and clean the glass
surface with a moist cloth.
Possible cause
The fuse is blown.
The zone is not hot because it oper-
ated only for a short time or the sen-
sor is damaged.
It is normal that there is a dark area
on the multiple zone.
service technician or dealer will not be free of charge,
also during the warranty period. The instructions about
the Service Centre and conditions of guarantee are in
the guarantee booklet.
PNC 949 594 401 01
220 - 240 V 50 - 60 Hz
Made in Germany
7.6 kW
Remedy
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
If the zone operated sufficiently long
to be hot, speak to an Authorised
Service Centre.
17

Advertenties

Inhoudsopgave
loading

Inhoudsopgave