Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Ensure that the wall is suitable for mounting the product with the
supplied screw/plugs. When looking for a suitable location for
installing the electric wall heater, take all safety instructions into
account. Ensure that the intended wall area is free from any hidden
electrical wires and water or gas pipes. The product must be mounted
so it is level. At least 60cm of free space is required at the bottom of
the product and at least 20cm of free space at left, right and top of the
product.
Please arrange the wall mounting bracket [ 2 ] horizontally at the
chosen suitable location and mark the 3 holes.
Remove the wall bracket and drill the holes (6mm) in the wall.
Put the plugs [ 4 ] in the holes, set up the wall mounting bracket [ 2 ]
as in the picture below, and fix it to the wall by screwing the 3 screws
clockwise into the holes.
Hang the electric wall heater on the wall mounting bracket.
Insert the power plug [4] into an earthed power outlet.
Note: Please ensure that the power plug is still accessible after
installation of the electric fireplace.
Note: Ensure that the electric fireplace is correctly installed. In case of
any doubt, please contact a professional.
Your electric fireplace is now ready for operation.
Operation
The voltage of the power source must comply with the specifications
Advertenties
Inhoudsopgave
