Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
G
3M™ PELTOR™ X-Series
X1A, X2A, X3A, X4A, X5A
X1B, X2B, X3B, X4B, X5B
X1P5, X2P5, X3P5, X4P5, X5P5
INTENDED USE
These 3M™ PELTOR™ earmuffs are intended to help
provide workers with protection against hazardous noise
levels. It is expected that all users read and understand
the provided user instructions as well as be familiar with
the use of this device.
IMPORTANT
Please read, understand, and follow all safety information
in these instructions prior to use. Retain these
instructions for future reference. For additional
information or any questions, contact 3M Technical
Services (contact information listed on the last page).
!
WARNING
This hearing protector helps reduce exposure to hazardous
noise and other loud sounds. Misuse or failure to wear
hearing protection at all times when exposed to hazardous
noise may result in hearing loss or injury. For proper use,
see supervisor, User Instructions or call 3M Technical
Services. If your hearing seems dulled or you hear a
ringing or buzzing during or after any noise exposure
(including gunfire), or for any other reason you suspect a
hearing problem, leave the noisy environment immediately
and consult a medical professional and/or your supervisor.
Failure to follow these instructions may result in
serious injury or death:
• To reduce the risks associated with igniting an
explosion, do not use this product in a potentially explosive
atmosphere.
Failure to follow these instructions may reduce the
protection provided by the earmuff and may result in
hearing loss:
a. Research suggests that users may receive less noise
reduction than indicated by the attenuation value(s) on the
packaging, due to variation in fit, fitting skill, and motivation
of the user. Refer to your applicable regulations for
guidance on how to adjust label values and estimate
attenuation. In addition, 3M strongly recommends fit testing
of hearing protectors.
b. Ensure the hearing protector is properly selected, fit,
adjusted, and maintained. Improper fit of this device will
reduce its effectiveness in attenuating noise. Consult the
enclosed instructions for proper fit.
c. Inspect the hearing protector before each use. If
damaged, select an undamaged hearing protector or avoid
the noisy environment.
d. When additional personal protective equipment is
necessary (e.g. safety glasses, respirators, etc.), select
flexible, low profile temples or straps to minimize
interference with the earmuff cushion. Remove all other
unnecessary articles (e.g. hair, hats, jewelry, headphones,
hygiene covers, etc.) that could interfere with the seal of the
earmuff cushion and reduce the protection of the earmuff.
e. Do not bend or reshape the headband or neckband,
and ensure there is adequate force to hold the earmuffs
firmly in place.
f. Earmuffs, and in particular cushions, may deteriorate
with use and should be examined at frequent intervals for
cracking and leakage, for example. When used regularly,
replace the ear cushions and foam liners at least twice a
year to maintain consistent protection, hygiene, and
comfort.
g. If the requirements above are not adhered to, the
protection afforded by the earmuffs will be severely
impaired.
EN 352 Safety Statements:
• This product may be adversely affected by certain
chemical substances. Further information should be sought
from the manufacturer.
• These helmet mounted earmuffs are of "large size
range". Helmet mounted earmuffs complying with
EN 352-3 are of "medium size range" or "small size range"
or "large size range". "Medium size range" helmet mounted
earmuffs are designed to fit the majority of wearers. "Small
size range" or "large size range" helmet mounted earmuffs
are designed to fit wearers for whom "medium size range"
helmet mounted earmuffs are not suitable.
NOTE
• When worn according to these User Instructions, this
hearing protector helps reduce exposure to both continuous
noises, such as industrial noises and noises from vehicles
and aircraft, as well as very loud impulse noises, such as
gunfire. It is difficult to predict the required and/or actual
hearing protection obtained during exposure to impulse
noises. For gunfire, the weapon type, number of rounds
fired, proper selection, fit and use of hearing protection,
proper care of hearing protection, and other variables will
impact performance. To learn more about hearing protection
for impulse noise, visit www.3M.com/hearing.
• Operating temperature range:
–20 °C (–4 °F) to 55 °C (131 °F)
• Storage temperature range:
–20 °C (–4 °F) to 55 °C (131 °F)
• Weight of Hearing Protector:
X1A = 184 g, X2A = 220 g, X3A = 245 g, X4A = 234 g,
X5A = 351 g, X1B = 149 g, X2B = 186 g, X3B = 223 g,
X4B = 202 g, X5B = 319 g, X1P5 = 188 g, X2P5 = 225 g,
X3P5 = 263 g, X4P5 = 240 g, X5P5 = 354 g.
1
Advertenties
Inhoudsopgave
