Download Inhoudsopgave Inhoud Print deze pagina

Height Adjustment; Concerns On Installation - Jole fortifi R Instructiehandleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 41

Height Adjustment

for Head Support and Shoulder Harnesses
see images
-
4
5
Please adjust the head support and shoulder harnesses to proper height
according to the child's height.
!
When used with internal harness system (Toddler mode), the shoulder
harness slots must be even with or just above the child's shoulders.
!
When used in booster mode, the shoulder belt guides must be even with or
just above the child's shoulders.
Squeeze the head support adjustment lever, meanwhile pull up or push down
the head support until it snaps into one of the 9 positions.
The head support positions are shown as
!
Side wings are able to open while the head support is adjusted to the 5
any higher position.

Concerns on Installation

see images
-
6
8
Not allowed to use the child seat with a 2-point-vehicle belt.
14
-2
4
5
Toddler Mode
(for Child between 9-18kg/ approx. 1 –4 years old)
see images
!
Please install the child restraint on the vehicle seat, and then put the child
in the child restraint.
i. Installation
-1
4
!
Please adjust the shoulder harnesses to proper height before installing the
child restraint.
!
When installing and adjusting the safety belts, make sure that both the
shoulder belt and the waist belt are not twisted and will not keep the safety
belts from being properly positioned.
th
or
1. Thread the safety belt through the back slot at the back of the child
restraint.
2. Put the belt tongue into the female buckle end .
3. Open the lock-off device and insert the shoulder belt portion of the vehicle
belt through it.
4. While pressing the child restraint, into the vehicle seat cushion pull the
belts to fasten the child restraint tightly and securely.
!
The child restraint can not be used if the vehicle safety belt buckle (female
buckle end) is too long to anchor the child restraint securely.
!
Please check a correct installation by moving the child restraint back and
forth.
A correct installed seat (vehicle belt path) is shown in
!
Shoulder belt passes through Lock-off Device, as
!
Waist belt passes through the back slot, as
!
The vehicle buckle tongue is engaged with vehicle female buckle end as
-3
13
-
9
17
9
11
13
10
12
13
-1
13
-2
15

Advertenties

Inhoudsopgave
loading

Inhoudsopgave