Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
• Regularly take off the cover and remove dust with an air gun. Take
• Under no circumstances should solvents or other aggressive
• Clean the device's surfaces with a soft, dry cloth.
Regulations
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The British
• Equipment in conformity with Moroccan standards.
• The declaration C( مCMIM) of conformity is available on our
Disposal:
• This product should be disposed of at an appropriate recycling
GENERAL DESCRIPTION
DIAG-STARTIUM products are designed for charging and starting 12V (6 elements) lead acid batteries (electrolyte, Gel
and AGM) for the model 60-12 and 6V (3 elements), 12V (6 elements) and 24V (12 elements) for the model 60-24:
Assembly - handle and wheels :
POWER SUPPLY
Check that the power and protection (fuse and / or circuit breaker) are compatible with the current required. The
appliance must be positioned so that the plug socket is accessible.
It must be connected to a grounded outlet according to the following recommendation:
Power supply
Protection
Charging
power
The recommended cross-section for an extension is : 3 x 2,5 mm².
14
DIAG-STARTIUM 60-12 / 60-24
the opportunity to have a qualified person check the electrical
connections with an insulated tool.
cleaning agents be used.
Declaration of Conformity is available on our website (see home
page).
website (see cover page).
facility. Do not dispose of in domestic waste.
DIAG-STARTIUM 60-12
charge
Starting
230V - 1 ph
16 A
2000 W
10 000 W
DIAG-STARTIUM 60-24
230V - 1 ph
16 A
2000 W
10 000 W
EN
Advertenties
Inhoudsopgave
