Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
⚠ WARNING
•
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman if you are in doubt
as to whether the product is properly
grounded. Do not modify the plug provided
with the product if it will not fit the outlet;
have a proper outlet installed by a qualified
electrician.
Assembly instructions
Description illustration A
The illustration shows what the trainer will looks
like after the assembly is completed.
You can use this as a reference during your
assembly, but do follow the assembly steps
always in the correct sequence as showed in the
illustrations.
Description illustration B
The illustration shows what components and parts
you should find when un-boxing your product.
‼ NOTE
•
Small parts can be hidden/ packed in hollow
spaces in the Styrofoam product protection
Description illustration B-1
The illustration shows the hardware kit that comes
with your product.
The hardware kit contains bolts, washers, screws,
nuts etc. and the required tools to properly fit
your trainer.
Description illustration C
The illustrations shows you in the correct following
order how to assembly your trainer best.
‼ NOTE
•
Part numbers shown in the assembly steps
are commencing with the spare part drawing
that can be found in the online full version
user manual.
12
⚠ WARNING
•
Assemble the equipment in the given order.
•
Carry and move the equipment with at least
two persons.
⚠ CAUTION
•
Place the equipment on a firm, level surface.
•
Place the equipment on a protective base to
prevent damage to the floor surface.
•
Allow at least 100 cm of clearance around
the equipment.
•
Refer to the illustrations for the correct
assembly of the equipment.
‼ NOTE
•
Save the tools provided with this product,
after you completed the product assembly,
for future service purposes.
Additional information
Packaging disposal
Government guidelines ask that we reduce the
amount of waste material disposed of in land fill
sites. We therefore ask that you dispose of all
packaging waste responsibly at public recycling
centres.
End of life disposal
We at Tunturi hope you enjoy many years of
enjoyable use from your fitness trainer. However,
a time will come when your fitness trainer will
come to the end of its useful life. Under 'European
WEEE Legislation you are responsible for the
appropriate disposal of your fitness trainer to a
recognised public collection facility.
Use
Master power switch (fig� E-2 A)
The equipment is equipped with a master power
switch to shut down the equipment completely.
To start the equipment:
- Insert the mains plug into the wall socket.
- Set the master power switch to the on position.
To stop the equipment:
- Set the mains power switch to the off position.
- Remove the mains plug from the wall socket.
Advertenties
Hoofdstukken
Inhoudsopgave
